Flickering in your new track lighting is usually caused by intermittent interruptions in electrical flow rather than a faulty installation. If you notice your lights are flickering, we recommend the following troubleshooting steps:
- Clean the electrical contacts: Turn off the circuit breaker first to avoid shocks. Remove the track heads and use a dry, lint-free cloth or a pencil eraser to clean the electrical contacts and bus bars. This removes oxidation that can block a solid connection.
- Reseat the track heads: Ensure each head is making solid contact with the rail. Position the adapter’s contact levers with the track’s groove and turn the head clockwise until you hear a click. If the heads feel loose, reseat them immediately to prevent intermittent contact.
- Check dimmer compatibility: If your system uses a dimmer, ensure it is LED-compatible. Older dimmers designed for incandescent bulbs often cause low-wattage LEDs to flicker.
- Verify bulb types: Do not combine halogen and LED bulbs on the same circuit, as their differing electrical properties can lead to increased flickering.
- Check for voltage drops: If multiple fixtures flicker simultaneously—especially when large appliances turn on—the issue may be related to building wiring or voltage drops.
If flickering persists after you have cleaned the contacts and reseated the heads, it may indicate a deeper wiring issue. We recommend contacting a licensed electrician to inspect the system and ensure it meets all safety codes.
Related FAQs
-
Where are Afci Breakers Mandatory According to the National Electrical Code?
Read More »: Where are Afci Breakers Mandatory According to the National Electrical Code?According to the National Electrical Code and updated standards such as the 2026 California Electrical Code, AFCI (Arc-Fault Circuit Interrupter) protection is mandatory for all 120-volt, single-phase, 15- and 20-ampere branch circuits serving specific residential areas. In Marina del Rey…
-
What are the New Afci Breaker Requirements for Los Angeles Kitchen Remodels?
Read More »: What are the New Afci Breaker Requirements for Los Angeles Kitchen Remodels?Under the 2026 California Electrical Code (CEC) adoption, kitchen remodels in Los Angeles must adhere to expanded safety standards for circuit protection. As part of these updates, Circuit Breaker Services are frequently required to ensure that the electrical system meets…
-
How do the 2026 Cec Changes Affect Residential Panel Upgrades in Los Angeles?
Read More »: How do the 2026 Cec Changes Affect Residential Panel Upgrades in Los Angeles?The 2026 California Electrical Code (CEC) changes significantly impact residential properties across Los Angeles and Marina del Rey by transitioning several previously recommended improvements into mandatory requirements. These updates focus on enhancing safety and efficiency, particularly regarding grounding, arc-fault protection,…
-
Do I Need a Permit to Add New Light Fixtures in Santa Monica?
Read More »: Do I Need a Permit to Add New Light Fixtures in Santa Monica?Yes, for the majority of lighting projects in Santa Monica and the surrounding Los Angeles area, the City of Los Angeles requires an electrical permit. Obtaining these permits is a critical step in ensuring your home remains safe and compliant…
-
How Much do Electricians Charge to Install Recessed Lighting in Los Angeles?
Read More »: How Much do Electricians Charge to Install Recessed Lighting in Los Angeles?We provide custom quotes for all residential lighting projects, as every home and installation requirement is unique. In Los Angeles and surrounding areas like Marina del Rey and Santa Monica, several factors influence the final cost of installing recessed lighting.…