What should I do if my Vanoopee Track Lights are Flickering after Installation?

Flickering in your new track lighting is usually caused by intermittent interruptions in electrical flow rather than a faulty installation. If you notice your lights are flickering, we recommend the following troubleshooting steps:

  • Clean the electrical contacts: Turn off the circuit breaker first to avoid shocks. Remove the track heads and use a dry, lint-free cloth or a pencil eraser to clean the electrical contacts and bus bars. This removes oxidation that can block a solid connection.
  • Reseat the track heads: Ensure each head is making solid contact with the rail. Position the adapter’s contact levers with the track’s groove and turn the head clockwise until you hear a click. If the heads feel loose, reseat them immediately to prevent intermittent contact.
  • Check dimmer compatibility: If your system uses a dimmer, ensure it is LED-compatible. Older dimmers designed for incandescent bulbs often cause low-wattage LEDs to flicker.
  • Verify bulb types: Do not combine halogen and LED bulbs on the same circuit, as their differing electrical properties can lead to increased flickering.
  • Check for voltage drops: If multiple fixtures flicker simultaneously—especially when large appliances turn on—the issue may be related to building wiring or voltage drops.

If flickering persists after you have cleaned the contacts and reseated the heads, it may indicate a deeper wiring issue. We recommend contacting a licensed electrician to inspect the system and ensure it meets all safety codes.


Related FAQs