Flickering in your new track lighting is usually caused by intermittent interruptions in electrical flow rather than a faulty installation. If you notice your lights are flickering, we recommend the following troubleshooting steps:
- Clean the electrical contacts: Turn off the circuit breaker first to avoid shocks. Remove the track heads and use a dry, lint-free cloth or a pencil eraser to clean the electrical contacts and bus bars. This removes oxidation that can block a solid connection.
- Reseat the track heads: Ensure each head is making solid contact with the rail. Position the adapter’s contact levers with the track’s groove and turn the head clockwise until you hear a click. If the heads feel loose, reseat them immediately to prevent intermittent contact.
- Check dimmer compatibility: If your system uses a dimmer, ensure it is LED-compatible. Older dimmers designed for incandescent bulbs often cause low-wattage LEDs to flicker.
- Verify bulb types: Do not combine halogen and LED bulbs on the same circuit, as their differing electrical properties can lead to increased flickering.
- Check for voltage drops: If multiple fixtures flicker simultaneously—especially when large appliances turn on—the issue may be related to building wiring or voltage drops.
If flickering persists after you have cleaned the contacts and reseated the heads, it may indicate a deeper wiring issue. We recommend contacting a licensed electrician to inspect the system and ensure it meets all safety codes.
Related FAQs
-
Who is Responsible for Pulling the Electrical Permit, the Homeowner or the Contractor?
Read More »: Who is Responsible for Pulling the Electrical Permit, the Homeowner or the Contractor?In California, it is standard practice and often a legal requirement for the licensed electrical contractor to pull the permit. While homeowners have the ultimate responsibility to verify that permits exist, reputable professionals include this as part of their service…
-
Are Permit Fees Higher for Subpanel Installations Compared to Main Panel Upgrades?
Read More »: Are Permit Fees Higher for Subpanel Installations Compared to Main Panel Upgrades?No, permit fees for subpanel installations are generally not higher than those for main panel upgrades. In fact, a subpanel installation typically requires a simpler permit package compared to a full panel upgrade or a whole-home rewire. Several factors influence…
-
How Long does it Take for a California Building Department to Issue an Electrical Permit?
Read More »: How Long does it Take for a California Building Department to Issue an Electrical Permit?The processing time for an electrical permit in California varies significantly depending on the local building department’s jurisdiction and the complexity of the project. Typical processing timeframes for cities in the Los Angeles area include: It is important to note…
-
Do I Need an Electrical Permit to Replace an Old Breaker Box in California?
Read More »: Do I Need an Electrical Permit to Replace an Old Breaker Box in California?Yes, if you are upgrading or replacing an electrical panel in California, you almost always require an electrical permit. This process ensures that the work complies with the California Electrical Code and meets essential safety standards. Key details regarding the…
-
How Much does a Residential Electrical Permit Cost for a Panel Upgrade in California?
Read More »: How Much does a Residential Electrical Permit Cost for a Panel Upgrade in California?The cost of a residential electrical permit for a panel upgrade in California varies significantly depending on the local jurisdiction and the specific scope of the project. Because fees are set by individual city or county building departments, homeowners should…