When your lights flicker specifically when the air conditioner turns on, it is usually due to a momentary voltage drop or a circuit issue. Below are the primary reasons this occurs:
- Normal Voltage Fluctuations: Large motors, such as an air conditioner compressor, draw a sudden rush of current when they cycle on. This causes a brief, predictable voltage dip that makes connected lights dim or flicker momentarily. This is generally considered normal and not a safety concern.
- Overloaded Electrical Circuits: If the flickering is persistent or the lights dim significantly, it is a sign of overloaded electrical circuit symptoms. This happens when the air conditioner draws significant current on a circuit that is already near its capacity.
- Loose Service Neutral Connection: While less common, a loose neutral wire at the main panel or utility connection can cause erratic voltage swings throughout the home when large loads like an AC unit are added. This is a serious hazard that can damage electronics or lead to a fire.
What you should do:
- Redistribute the load: If the flickering is localized to one area, you may need to move other high-demand appliances to different circuits.
- Professional Inspection: If flickering is accompanied by buzzing sounds, burning smells, or frequently tripping breakers, you should contact a licensed electrician immediately.
- Circuit Upgrade: An electrician may need to add a dedicated circuit or perform a load calculation to ensure your panel can safely handle the demand of your air conditioner.
Related FAQs
-
Do I Need to Place Carbon Monoxide Detectors on Every Level of my House?
Read More »: Do I Need to Place Carbon Monoxide Detectors on Every Level of my House?Yes, it is essential to have detection on every floor of your residence. According to the California Electrical Code (Title 24, Part 3), hardwired and interconnected carbon monoxide detectors with battery backup are required on every habitable level of a…
-
Where is the Best Place to Install a Carbon Monoxide Detector in my Home?
Read More »: Where is the Best Place to Install a Carbon Monoxide Detector in my Home?The most effective place to install a carbon monoxide (CO) detector is in the hallway immediately outside of sleeping areas, positioned between 3 and 5 feet from the floor. Because carbon monoxide has a relative density of 0.968—nearly identical to…
-
Is it Illegal for a Handyman to Perform Electrical Panel Work in California?
Read More »: Is it Illegal for a Handyman to Perform Electrical Panel Work in California?Yes, it is illegal for a handyman to perform electrical panel work in California. Under state regulations, handymen are limited to projects where the total cost of labor and materials is under $1,000 and, most importantly, where no building permit…
-
What Electrical Jobs can a California Homeowner Legally do Themselves?
Read More »: What Electrical Jobs can a California Homeowner Legally do Themselves?In California, homeowners may legally perform minor electrical tasks themselves or hire a handyman only if the total project cost (including both labor and materials) is under $1,000 and the work does not require a building permit. However, the majority…
-
What is the Difference between Arc-fault and Ground-fault Circuit Protection?
Read More »: What is the Difference between Arc-fault and Ground-fault Circuit Protection?While both devices are designed to enhance home safety, they address very different hazards. Understanding these differences is essential for meeting the 2026 California Electrical Code standards, especially during kitchen remodels or panel upgrades. Arc-Fault Circuit Interrupters (AFCIs) AFCIs are…